Skip to main content

EDITORIAL article

Front. Plant Sci., 21 November 2013
Sec. Plant Biotechnology
This article is part of the Research Topic Lignocellulosic feedstocks: research progress and challenges in optimising biomass quality and yield View all 19 articles

Lignocellulosic feedstocks: research progress and challenges in optimizing biomass quality and yield

  • 1Institute of Biological, Environmental and Rural Sciences, Aberystwyth University, Aberystwyth, UK
  • 2Biology Department, University of Massachusetts, Amherst, MA, USA

Dedicated Energy Crops and Models

Lignocellulosic biomass derived from energy crops and agricultural residues is a promising renewable source for the production of transportation fuels and bio-based materials. Plants exhibiting C4 photosynthesis are amongst the most promising dedicated energy crops as they possess tremendous intrinsic efficiency in converting solar energy to biomass. Van der Weijde et al. (2013) provide an excellent overview of the potential of five C4 grasses from the Panicoideae clade (maize, Miscanthus, sorghum, sugarcane, and switchgrass) as lignocellulosic feedstock for the production of biofuels. The authors discuss yield potential, biomass quality and genetic improvement of dual-purpose food and energy cultivars and dedicated energy cultivars through plant breeding and also highlight several research needs. Perennial growth habit provides a number of environmental advantages over annuals as bioenergy crops, including the requirement of less fertilizer, reduced soil erosion, and even the potential for soil carbon sequestration. Schwartz and Amasino (2013) review the importance of the ability of perennial crops to recycle nitrogen, reducing the need for energy intensive N fertilizer, and the subsequent production of potent NOx greenhouse gases. An interesting focus is on the importance of photoperiodic flowering and dormancy in switchgrass and the relevance of these traits to N recycling and genetic variation that contributes to these dynamics. Wang et al. (2013a) review carbon partitioning in sugarcane, which has a source-sink system that creates high concentrations of easily extracted and economically valuable stem sucrose. Nonetheless, the majority of carbohydrate in sugarcane is lignocellulose. A detailed understanding of the molecular, and physiological processes underlying the partitioning of carbon assimilates will provide targets to manipulate the balance between sucrose and lignocellulosic biomass as carbon sinks. These include sugar transport and localization and the engineering of novel sugar sinks. This classic example of a possible dual-purpose crop can also be improved through breeding and genetic engineering of cell wall properties to further optimize biofuel production. Slavov et al. (2013) review the current knowledge about cell wall genetics, chemistry and structure in Miscanthus. This includes the prospects of developing detailed molecular genetic and biochemical models of pathways relevant to biomass conversion efficiency. The life history and genome complexities exhibited by the Miscanthus species in question dictate that genome wide association studies are a necessary approach toward the genetic dissection of these traits. Potential targets for biomass improvement include cell wall regulatory genes, intercellular trafficking, and microtubule organization. Opportunities exist to functionally test gene-trait associations for cell wall quality in this bioenergy crop, short-term progress toward understanding of the molecular underpinnings of cell wall quality traits in Miscanthus will be driven by research in model grasses. Setaria viridis is a rapid cycling C4 panicoid grass with several attributes that make it an excellent model for bioenergy grasses. Petti et al. (2013) describe the composition and saccharification dynamics of S. viridis aboveground biomass as similar to sorghum, maize, and switchgrass, confirming its potential as model species for panicoid translational genomics. Another grass proposed as a model for energy grasses, forage grasses and cereals is Brachypodium distachyon. Rancour et al. (2012) present chemical composition data of cell walls from distinct organs and developmental stages. Results indicate similar cell wall composition to those previously determined for a diverse set of C3 forage grasses and cereals, highlighting the usefulness of B. distachyon as a model for temperate grasses. As with S. virdis, the authors report some differences for particular wall traits.

Cell Wall Quality and Conversion

The plant cell wall is a heterogeneous mix of polymers that interact to assemble a complex and recalcitrant matrix. Cell wall quality with respect to biomass conversion is determined by the relative abundances of the different polymers, polymer substitutions and modifications and the interactions among polymers.

It is well established that lignin quantity and monolignol composition is a major contributor to the recalcitrance of cell wall industrial processing. Reducing lignin content and modifying its composition have become major strategies for bioenergy feedstock development. Sattler and Funnell-Harris (2013) review the impact of lignin modifications on pathogen susceptibility in a range of plants species. Surprisingly, data from existing literature indicates that reducing lignin content and altering its composition will not inevitably increase susceptibility to pathogens and in some instances it has increased resistance. Wang et al. (2013b) review the processes that follow monolignol biosynthesis, including their acetylation and glycosylation in the cytoplasm, transport to the apoplast, and deglycosylation, and polymerization into lignins. The authors point out that lignification is best understood at the level of biosynthesis with the goal of reducing lignin content. Increasing our understanding of the subsequent events will reveal important control points that can be used to develop novel strategies for improving plant biomass quality. Saathoff et al. (2013) discuss the roles of class III peroxidases in lignification, and biotic, and abiotic stress response. The authors provide an analysis of switchgrass class III peroxidases and predict their mechanistic role in defense to biotic stresses such as insect herbivory. Transcription factor activity is a major mechanism controlling the expression of genes involved in lignin biosynthesis and secondary cell wall formation in general. Cassan-Wang et al. (2013) describe a strategy to identify candidate transcriptional regulators of lignin biosynthesis in Arabidopsis thaliana based on mutant transcriptome analysis and sequence homology. Genetic analysis of the resulting candidate transcription factors revealed several novel mutants exhibiting altered lignin deposition, adding to the emerging complexity of the transcriptional networks regulating secondary cell wall formation.

Most of the fermentable sugar in lignocellulosic biomass crops is glucose and xylose in the form of cellulose and xylan polymers, respectively. Cellulose biosynthesis occurs at the plasma membrane by a complex that includes a number of Cellulose Synthase A catalytic subunits that extrude para-crystalline microfibrils. Brabham and Debolt (2013) review the use of chemical genetics as a tool to examine cellulose biosynthesis with screens to identify novel compounds that target relevant pathways. These new drugs will provide powerful tools for the detection of new molecular players in cell wall biosynthesis and in elucidating cell wall dynamics. Although some of the genes involved in the biosynthesis of the hemicellulosic xylan polysaccharide have been identified in A. thaliana, many of the biochemical steps of xylan synthesis remain unknown. Psyllium mucilage is overwhelmingly heteroxylan rich, presenting an opportunity to discover genes involved in xylan production. Jensen et al. (2013) provide an in-depth analysis of RNA-Sequencing to reveal overabundant transcripts in psyllium mucilaginous tissue. Results suggest that the biosynthesis and structure of mucilage xylan is somewhat distinct from secondary cell wall xylan. The diversity of glycosyl transferases identified in the mucilage might provide targets for future research in understanding and manipulating xylan biosynthesis.

A distinct feature of grass cell walls is the abundance of ferulic acid that is ester-linked to the hemicellulose glucuronoarabinoxylan. These ester-linked ferulates can form covalent linkages between polysaccharides and lignin and impede digestibility. Molinari et al. (2013) correlate the expression of BAHD genes, previously identified as candidates for the feruloylation of glucuronoarabinoxylan, with levels of bound ferulate and para-coumaric acid in the various B. distachyon tissues and developmental stages. Their findings warrant further studies to demonstrate a functional role of these genes in feruloylation. Matrix polysaccharides such as hemicelluloses and pectins in both grasses and eudicots are O-acetylated, affecting their interactions with other polymers and negatively affecting cell wall hydrolysis. Pawar et al. (2013) review the functional aspects of O-acetylation in trees and enzymes involved in both acetylation and de-acetylation. Given the high impact of acetylation on the physico-chemical properties of wood, these enzymes are of particular interest as they provide tools to manipulate feedstock quality. Pectin is a small fraction of plant secondary cell walls, yet these complex polysaccharides might have a significant impact on biomass yield and quality. Xiao and Anderson (2013) describe how pectin modification and cross-linking, largely determined by methyl esterification, affect growth rate and expansion and in turn influence overall biomass yield. Pectin modification can also influence secondary wall development and cell adhesion. The authors also discuss the value of pectin-rich feedstocks such as sugar beet as a source of fermentable sugars and other high-value products.

Biomass pretreatment is currently a fiscally prohibitive step in lignocellulose bioethanol production. Less recalcitrant genotypes can ameliorate this cost as well as positive interactions between genotypes and pretreatments. Serapiglia et al. (2013) measured sugar release by enzymatic hydrolysis following hot-water pretreatments from a range of shrub willow (Salix spp.) genotypes with differing biomass composition. Although relationships between cellulose and lignin content and sugar release were identified, results indicate that it is difficult to predict feedstock quality based on biomass composition. This suggests structural characteristics influence the effects of pretreatment and subsequent hydrolytic efficiency. While this collection of articles emphasizes bioconversion of lignocellulosic biomass to liquid fuels, it is important to emphasize the viability of thermochemical conversion for the production of both fuel and electricity. Tanger et al. (2013) review thermochemical conversion technologies and plant attributes that influence the efficiency of that process. The authors highlight the importance of biomass traits less relevant to bioconversion such as H:C and O:C ratio and mineral content. They also describe methods for high-throughput phenotyping of cell wall biomass that are distinct from traditional biochemical analysis of cell walls.

The sustainable production of energy, chemicals, materials, food and feed from plants is at the heart of a bio-based economy. Vanholme et al. (2013) present an insightful review in which they discuss the various requirements necessary to successfully develop a carbon-negative bio-based economy that can help mitigate climate change. The authors highlight that the viability of a bio-based economy depends on the integration of three pillars: green biotechnology for primary biomass production, white biotechnology to produce products from biomass and the thermochemical pillar for the conversion of residual biomass streams. Innovation, integration of both fundamental and applied research, and interaction between the pillars will be critical to generate a sustainable bio-based economy.

Lastly, we would like to thank all the authors, reviewers and the Frontiers editorial office for their contributions that resulted in, what we believe, a very interesting and relevant topical issue.

References

Cassan-Wang, H., Goué, N., Saidi, M. N., Legay, S., Sivadon, P., Goffner, D., et al. (2013). Identification of novel transcription factors regulating secondary cell wall formation in Arabidopsis. Front. Plant Sci. 4:189. doi: 10.3389/fpls.2013.00189

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Brabham, C., and Debolt, S. (2013). Chemical genetics to examine cellulose biosynthesis. Front. Plant Sci. 3:309. doi: 10.3389/fpls.2012.00309

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Jensen, J. K., Johnson, N., and Wilkerson, C. G. (2013). Discovery of diversity in xylan biosynthetic genes by transcriptional profiling of a heteroxylan containing mucilaginous tissue. Front. Plant Sci. 4:183. doi: 10.3389/fpls.2013.00183

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Molinari, H. B. C., Pellny, T. K., Freeman, J., Shewry, P. R., and Mitchell, R. A. C. (2013). Grass cell wall feruloylation: distribution of bound ferulate and candidate gene expression in Brachypodium distachyon. Front. Plant Sci. 4:50. doi: 10.3389/fpls.2013.00050

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Pawar, P. M.-A., Koutaniemi, S., Tenkanen, M., and Mellerowicz, E. J. (2013). Acetylation of woody lignocellulose: significance and regulation. Front. Plant Sci. 4:118. doi: 10.3389/fpls.2013.00118

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Petti, C., Shearer, A., Tateno, M., Ruwaya, M., Nokes, S., Brutnell, T., et al. (2013). Comparative feedstock analysis in Setaria viridis L. as a model for C4 bioenergy grasses and Panicoid crop species. Front. Plant Sci. 4:181. doi: 10.3389/fpls.2013.00181

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Rancour, D., Marita, J., and Hatfield, R. D. (2012). Cell wall composition throughout development for the model grass Brachypodium distanchyon. Front. Plant Sci. 3:266. doi: 10.3389/fpls.2012.00266

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Saathoff, A., Donze, T., Palmer, N., Bradshaw, J., Heng-Moss, T., Twigg, P., et al. (2013). Towards uncovering the roles of switchgrass peroxidases in plant processes. Front. Plant Sci. 4:202. doi: 10.3389/fpls.2013.00202

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Sattler, S., and Funnell-Harris, D. (2013). Modifying lignin to improve bioenergy feedstocks: strengthening the barrier against pathogens? Front. Plant Sci. 4:70. doi: 10.3389/fpls.2013.00070

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Schwartz, C., and Amasino, R. (2013). Nitrogen recycling and flowering time in perennial bioenergy crops. Front. Plant Sci. 4:76. doi: 10.3389/fpls.2013.00076

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Serapiglia, M. J., Humiston, M. C., Xu, H., Hogsett, D. A., Mira De Orduña, R., Stipanovic, A. J., et al. (2013). Enzymatic saccharification of shrub willow genotypes with differing biomass composition for biofuel production. Front. Plant Sci. 4:57. doi: 10.3389/fpls.2013.00057

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Slavov, G., Allison, G. G., and Bosch, M. (2013). Advances in the genetic dissection of plant cell walls: tools and resources available in Miscanthus. Front. Plant Sci. 4:217. doi: 10.3389/fpls.2013.00217

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Tanger, P., Field, J. L., Jahn, C. E., Defoort, M. W., and Leach, J. E. (2013). Biomass for thermochemical conversion: targets and challenges. Front. Plant Sci. 4:218. doi: 10.3389/fpls.2013.00218

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Van der Weijde, T., Alvim Kamei, C. L., Torres, A. F., Vermerris, W., Dolstra, O., Visser, R. G. F., et al. (2013). The potential of C4 grasses for cellulosic biofuel production. Front. Plant Sci. 4:107. doi: 10.3389/fpls.2013.00107

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Vanholme, B., Desmet, T., Ronsse, F., Rabaey, K., Van Breusegem, F., De Mey, M., et al. (2013). Towards a carbon-negative sustainable bio-based economy. Front. Plant Sci. 4:174. doi: 10.3389/fpls.2013.00174

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Wang, J., Nayak, S., Koch, K., and Ming, R. (2013a). Carbon partitioning in sugarcane (Saccharum species). Front. Plant Sci. 4:201. doi: 10.3389/fpls.2013.00201

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Wang, Y., Chantreau, M., Sibout, R., and Hawkins, S. (2013b). Plant cell wall lignification and monolignol metabolism. Front. Plant Sci. 4:220. doi: 10.3389/fpls.2013.00220

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Xiao, C., and Anderson, C. T. (2013). Roles of pectin in biomass yield and processing for biofuels. Front. Plant Sci. 4:67. doi: 10.3389/fpls.2013.00067

Pubmed Abstract | Pubmed Full Text | CrossRef Full Text

Keywords: biofuels, biomass, cell wall, energy crops, feedstocks, grasses, lignocellulose, recalcitrance

Citation: Bosch M and Hazen SP (2013) Lignocellulosic feedstocks: research progress and challenges in optimizing biomass quality and yield. Front. Plant Sci. 4:474. doi: 10.3389/fpls.2013.00474

Received: 24 September 2013; Accepted: 03 November 2013;
Published online: 21 November 2013.

Edited by:

Chandrashekhar P. Joshi, Michigan Technological University, USA

Copyright © 2013 Bosch and Hazen. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: mub@aber.ac.uk; hazen@bio.umass.edu

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.